system shelter
Rational and freely combinable standardized sunshade shelters. Excellent durability.
This sunshade shelter is designed with a focus on the beautiful design unique to membrane materials while achieving quick delivery and low cost.
Shapes and colors that fit people’s emotions, such as gorgeousness, gentleness, and fun, are essential for landscape creation.
The rationality and combination of the planned products have realized a systematization that allows a variety of design developments.
.jpg)
.jpg)
.jpg)
Products & Services
forte
Soft Shelter is a sunshade tent that focuses on beautiful design unique to membrane materials. With any combination of these tents, they can be used to create gorgeous scenery in parks, commercial facilities, bus stops, and other locations.
Superior antifouling properties due to titanium dioxide photocatalytic reaction system
In the titanium dioxide photocatalytic reaction system, titanium dioxide (Tio2) coated on the membrane material generates light energy when exposed to ultraviolet light, creating electrons and holes. The electrons react with oxygen and the holes react with water to oxidize and decompose stains on the membrane surface. The excellent stain removal effect of this system has already been proven in many cases and is far superior to that of conventional PVC membranes.
*Myanmar Chemicals and Nippon Soda Co., Ltd. jointly developed the membrane material surface treatment technology based on the basic technology for oxidative decomposition-type photocatalysts developed by the laboratory of Professor Akira Fujishima of the University of Tokyo’s Faculty of Engineering and Nippon Soda Co.
Forever beautiful transparency
Due to the antifouling effect of the titanium dioxide photocatalytic reaction system, there is almost no decrease in light transmittance due to contamination of the membrane material, allowing comfortable natural light to enter the building.
UV cut 95
Blocks out more than 95% of harmful UV rays. Provides a space that is friendly to both people and tent components.
membrane material
generic specs
| design condition | Design wind speed Surface Roughness Classification III Standard wind speed 34m/sec |
Design snow load Vertical snow depth d=30cm Unit volume weight 20N/m²/cm |
|---|---|---|
| Steel materials used | Structural Copper Tubing Square copper tube CT Copper |
STK 400 STKR 400 SS 400 |
| Bolt used | F8T, SUS 304, JIS standard product (hot dip galvanized) | |
| Concrete used | FC18N/㎟ or higher | |
| design bearing capacity | 50KN/m2 (long term), 100KN/m2 (short term) | |
| anchor bolt | SNR 400B |
Membrane Performance Chart
Purify Shine Sky (PSS200)
| Thickness (mm) | 0.70±0.06 | JIS K 6404 |
|---|---|---|
| Mass (g/m2) | 890±80 | JIS K 6404 |
| Standard strength (N/cm) | 409×409 | JIS L 1096 |
| Certification number of fire protection performance | Building Standard Law Enforcement Ordinance, Article 136-2-2, Item 1 (DW-0121) | |
| Flameproof material | Flame retardant grade 2 | JIS A 1322 |
Purify Shine Sky (PSS200)
| Clean Max (CMX220) | Tensile strength 730 x 730(N/cm) | NM-3032 (noncombustible material) |
|---|
membrane material
single type
Single-pillar structure type for parks and commercial facilities
design variation
combination type
Combine units to meet a wide range of landscape needs
design variation
rest space&passage type
Modern boomerang structure with the advantages of membrane material
design variation
